The PCI to Quad CF Card Adapter is a solution for creating a low cost large capacity SSD (solid state drive). Designed to fit into any PCI slot, either standard height or low profile, this adapter allows as many as 4 CF (Compact Flash) media of any capacity to be used like ordinary hard drives in any system. Using the built-in firmware utility, the 4 CF cards can be combined to become one large volume by configuring them as RAID 0, RAID 1, or RAID 10 for redundancy or as 4 separate drives.

• Enable CF to be used like Solid State Drive (SSD)
• Connects up to 4 CF - type I/II cards
• CF can be configured as 4 individual drives or in RAID 0, RAID 1, RAID 10*
• CF card can be used as boot device or for extra storage
• Fits standard height or low profile system
• LED connector for power and drive activity
• Supports UDMA, DMA, and PIO modes
• Supports DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel 2.4+
• *note: Only fixed disk type Compact Flash can be used to create RAID sets. Removable type CF can only be used as individual drives. Use the SilCfg Management utility to see whether the CF card is fixed disk or removable type CF. Otherwise, use Diskpart which is included with Windows XP.

• Connect up to 4 Compact Flash Type I /II cards
• CF slot 1 and 2 support Type II and MicroDrive
• 4 CF can be set as individual drive or as RAID 0 (Striped), RAID 1 (Mirrored), and RAID 10 (Mirrored Striped)*
• CF card can be bootable device containing OS and application
• SiICfg Management Utility under Windows for RAID and device status / report
• LED connector(HDD_LED) for Power and Drive Activity
• PCI BUS slot compatible
• Compliant with PCI specification, revision 2.2
• Integrated PCI DMA engines
• 32-bit, 33MHz fully compliant PCI host interface
• Supports UDMA, DMA, and PIO modes
• Features one 256-byte FIFO (32-bit x 64 deep) for host reads and writes
• Features command buffering from the PCI to CF
• Features Virtual DMA: Bus master transfer on the PCI bus and PIO transfer on the ATA Bus
• Supports DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel 2.4+
• *RAID 10 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring