- Automatic IRQ and I/O Address Selection (Does Not Support Legacy Address Re-mapping)
- Supports PCI IRQ Sharing - Saves Valuable Resources for Other Expansion Cards
- Support 32-bit PCI Bus, PCI Specification Revision 2.3
- Supports On-chip Hardware Flow Control Resistors Guarantee Data Integrity
- Supports More than One Card in a System
- Build-in Improved 16C550 Compatible UART with 16 byte Transmit-receive 256-byte Deep FIFO
- Fast Data Rate up to 921.6 Kbps
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: None, Even, Odd, Space, Mark
- Signal:
- RS-422: TxD+, TxD-, RxD+, RxD-, GND
- 4 Wire RS-485: TxD+, TxD-, RxD+, RxD-, GND
- 2 Wire RS-485: Data+, Data-, GND
- Operating Temperature: 0 to 55C
- Operating Humidity: 5 to 95% RH
- Built-in 4-pin Power Connector Provides Extra Power When Connected to the System Power Supply (Recommended). Jumper Setting Options for 5V or 12V
|
